Vehicles
30 not categorized PORSCHE 356A FRONT BEARINGCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.150TBF900 Replace worn-out original front control arm / wishbone bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This is located at the front of the control arm / wishbone. The correct matching poly-graphite bushing for the rear of the control arm is part # 150tbr900 sold individually. 2 necessary per car.
$48.40
Make a selection BBI9914010006 The bbi street cup suspension package improves the handling response of the vehicle by upgrading the factory springs with an improved linear rate springs and replacing the factory arms and links with the motorsport cup version that uses spherical bearings.
$7,295.00
Make a selection 96434101807AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 018 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$418.00
Make a selection 477405641 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. View/Change Diagram
From $7.56
Make a selection 90005300600 Porsche classic part this is an original ball-type bearing for the inner side of the early “small†25 mm spindle   it measures: id 25 mm and od  62 mm  it’s marked “17305 on the face of the inner ring  tip  -- don’t forget to have a set of front wheel bearings in your emergency travel parts kit  View/Change Diagram
From $20.19
Make a selection 35587743 Our shop favorite, bilsteins are original equipment on many Porsches and have won, for Porsche, countless races. Bilsteins are the highest quality shocks made and will last the lifetime. Bilstein rsr front strut assemblies come with 19mm raised spindle and better shock valving (161/160). Strut shown has the steering arms modified to reduce bump steer. Upper spring perch comes complete with bearings. Sold each, left side. General Fitment911 1970-73911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$752.08
Make a selection 90150186400 We have seen many a fuel pump hanging because of old, cracked mounts. Both annoying and dangerous, these mounts are often overlooked on 1970-74 models, as the pump is hidden away over the right heater control valve. These are also critical items when relocating the fuel pump to the front View/Change Diagram
From $18.00
Make a selection 91411600001 Our 18-piece clutch package contains everything we use in our shop for a perfect clutch replacement. beware of lesser kits, you will need all of these parts! Included is the clutch installation manual. Kit includes: rear main seal, throwout bearing, 2 throwout bearing clips, flywheel, front trans. Seal, 2 cv joint gaskets, flywheel o-ring, ball stud cup, 2 muffler gaskets, needle bearing, cv joint bolt, clutch alignment tool, flywheel crush washer, felt washer, pressure plate, clutch disc, clutch installation manual. General Fitment914 1970-76
$917.39
Make a selection 90005900200 Note: early small spindle must use with 900-059-003-00 this is a tapered roller bearing for the outer end of both the early “small†25 mm spindle and later “large†30 mm spindle   it measures: id 20  and  od 52 mm  it’s marked 30304 on the face of the inner ring tip  -- don’t forget to have a set of front wheel bearings in your emergency travel parts kit  View/Change Diagram
From $16.92
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 91411600002 Our 18-piece clutch package contains everything we use in our shop for a perfect clutch replacement. beware of lesser kits, you will need all of these parts! Included is the clutch installation manual. Kit includes: rear main seal, throwout bearing, 2 throwout bearing clips, flywheel, front trans. Seal, 2 cv joint gaskets, flywheel o-ring, ball stud cup, 2 muffler gaskets, needle bearing, cv joint bolt, clutch alignment tool, flywheel crush washer, felt washer, pressure plate, clutch disc, clutch installation manual. General Fitment914 1970-76
$917.39
Make a selection BBI9974010001 Features
$1,895.00
Make a selection ER2071600 Elephant racing low-friction control arm mounts allow for free control arm movement, eliminating any potential for binding. Elephant racing corrected a key factory design limitation:our mounts self-align in all axis, becoming collinear to avoid binding as the arm moves through its range of motion. The low-friction control arm mounts self-align in both the horizontal and vertical planes. The result is collinear front and rear mounts delivering smooth non-binding action. You get superior performance and a smoother ride. Kit includes everything required to upgrade one car. Factory rear mounts are replaced with our self-aligning mounts. Factory front mounts are retained and augmented with self-aligning washers. ...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76 912 1965-69
$225.00
Make a selection FVD34101702RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection FVD34101702RAT We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and r...(choose a part on the right to read more)
$440.00
Make a selection SPLTRE996 The front tie rod ends allow the tie rod end pivot to be relocated, which will correct bump steer resulting from modified caster or lower arm geometry, thus reducing lap times. on cars that are lowered significantly, relocating the pivot point will also keep the tie rod end from binding, thereby preventing the inner tie rods from breaking or bending when racing or drifting. Precision cnc machined 9310 alloy shanks for 190ksi tensile strength and incredible impact resistance, to take the abuse of drifting. also features t2024 spacers and buckles for strength/lightweight and qa1 65 deg hi-misalignment bearings. General Fitment911 1998-05911 TURBO/GT2 2001-05 911 2005-08 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 TURBO/GT2 2010-13 BOXSTER 1997-04 CAYMAN 2006-08
$673.65
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD34101807AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. The reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD341999r. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform you immediately. General Fitment911 1989-94
From $418.00
Make a selection FVD34101802RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection FVD34101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection P911830 This is a true, 935-style spring plate design for the c2/4. Under hard cornering, rubber mounted suspension points can deform effecting critical angles of camber and toe. Erp/weltmeisters spring plates incorporated heim-joint linkage for precise suspension movement, a necessity for high speed handling and stability. The plates have also been designed to be mounted either right-side up or upside-down, offering a larger number of alignment settings. General Fitment911 1989-94
$795.99
Make a selection MIS2000E Great inexpensive way to convert your four lug wheel bolt pattern to the five lug 911 style so you can add six inch five lug wheels. kit consists of General Fitment914 1970-76
$1,163.46
Make a selection 150PB00619 Replace worn-out original stabilizer bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. Sold individually. 2 necessary per car. Please note: this fits 911 models from 1965-73 if fitted with 19 mm original stabilizer bars. It also fits the 1975-77 930 turbo model if fitted with 19 mm original stabilizer bars.
$57.20
Make a selection 411407075 At last, our own cross drilled rotors for your 914! original German rotors, cross drilled for cooler operation and long life. Order a new set of brake pads and wheel bearings and seals while you are at it! sold as a pair. View/Change Diagram
From $88.00
Make a selection 150PB10134 Replace worn-out original sway bar drop link bushings with this longer lasting poly-graphite plastic bushing set. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. The set includes 4 complete bushings and 4 sleeves (8mm inner diameter). Sold as a set. 1 necessary per car.
$73.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |